T10 Pergola Timing Belts

Multisistem T10 Open End Timing Belts are used widely in the shading industry. In this article, you can find detailed information about the domestic production of Multisistem T10 Pergola and Awning belts. We will answer frequently asked questions about T10 Belt prices, T10 Belt Technical Information, and T10 Belt Endurance Tests and belts. You can also send your questions about T10 Open End Timing Belts to information@multibelts.com e-mail address. You can browse our open-ended timing belts or other products, place an order, and request samples.

What is T10 Open End Timing Belt?

T10 Open End Timing Belt is a type of timing belt with wear-resistant polyurethane teeth and an internal structure reinforced with high-quality steel wire. It can be combined with different materials according to the purpose of use. The toothed surfaces (PAZ) of T10 PU Open End Timing Belts can be covered with a friction-reducing and wear-resistant polyamide fabric. Likewise, the back surfaces of Pu timing belts (PAR) can be covered with polyamide fabric. There are also cases where both surfaces (PAZ/PAR) are used by covering them with polyamide fabric. When deciding on coatings, the conditions under which the belt will operate are very important. In operating conditions requiring low friction, high strength, and low noise, it is recommended to use T10 Belts with coating. You can safely use your belts, which can also be covered with antistatic fabrics for special conditions. Standard Multisystem T10 Pu Open End Timing Belts are used for ambient temperatures between -5 C and + 80 C. Special polyurethane raw material that can withstand temperatures between -30 C and +130 C can be used for PU timing belts that will operate at different temperature values. If the working conditions of our standard belts do not meet your needs, you can get support from our experts.

T10 PU Open-Ended Timing Belt Prices

T10 Open End Timing Belt prices are calculated according to the quantity and mm of the belt you will buy. You can contact us for information about the price of Standard T10 Open End Timing Belts. The price of the coated belt is calculated by adding the coating cost to the belt price. Multisistem carries out its productions in its factory with high technological infrastructure in Kadirli OSB. Because it is domestic production, you can get high-quality products at affordable prices. You can get information about prices and all our products at information@multibelts.com e-mail address.